Apple Color LaserWriter 12/600 PS ation User Manual download pdf (Page 5)

96.11.13.15.58

Color LaserWriter 12/660 PS 3–2

Overview

The Color LaserWriter 12/660 PS is an enhanced version of the

original Color LaserWriter 12/600 PS. The 12/660 engine and

plastics are identical to the original in every respect, and all

ﬁnished goods and service part numbers apply equally to both

printers. The sole differences between the two versions are in

the packaging and setup, the ROM and RAM on the I/O

controller board, and the driver software.

Packaging and

Setup Changes

The Color LaserWriter 12/660 PS requires two extra steps

during setup, the leveling of the printer and the removal of oil

absorption sheets from the fuser assembly.

Note

: The orange ﬂag that identiﬁes the shipping screw has

also been enlarged in the new version of the printer.

The leveling procedure helps to alleviate oil overﬂow problems

within the fuser assembly. The level and shim kit that comes

with the 12/660 PS is also available separately as P/N 076-0622

for those who would to perform the procedure on the original

version of the printer. After removing the packing tape from

the outside of the printer, performing the leveling procedure

below before proceeding any further.

1 Remove the spirit level and the round black rubber shims from

their package. Snap the spirit level into its base.

2 Open the printer’s top access cover and place the spirit level on

top of the fuser to level the printer, ﬁrst from front-to-back, then

from side-to-side.

Spirit Level

1 2 3 4 5 6 7 8 9 10 ... 375 376

No comments

Apple Color LaserWriter 12/600 PS ation User Manual Page 5