Apple Color LaserWriter 12/600 PS ation User Manual download pdf (Page 373)

Pump The Fuser Jam Release Lever To Remove Excess Oil

Open the fuser access door to locate the teal green fuser paper jam release lever. Pump the lever at

least 50 times to manually remove excess oil from the fuser assembly oil catch tray and move it back

to the oil reservoir. Under most circumstances this action will allow the oil overflow sensor flag to

drop back to its normal operating position.

Push Down The Floating Oil Overflow Sensor Flag To Reset The Error

To insure that the previous error condition is cleared, use

a finger or other blunt object to gently push the oil

overflow sensor flag down to its normal position. The

sensor flag floats on top of the oil in the fuser oil catch

tray beneath the PS10 photosensor. To access it, open

the fuser delivery door so that the PS10 photosensor

mounting bracket is exposed. The sensor flag is located

behind the mounting bracket (see Figure 5). This step

may not be necessary in all cases.

Caution: Allow adequate time for the fuser assembly

to cool before performing this procedure.

Figure 5- PS10 Sensor Flag Location

Sensor flag is

located below

this cutout

3/14/96

Almost any non-compressible flat object can be used as a shim when leveling the Color LaserWriter.

Items commonly found at customer locations which can be used include Post-It Notes™, note cards,

paper, magazines, etc. Other materials that can be cut to size include wood, plastic, and metal. Post-It

Notes™ work well because the shim height can be easily adjusted by tearing off or adding pieces of

paper. Install the shims under one or more of the small plastic feet found on the bottom of the printer.

Engineering is working to identify and make available shims specially designed for leveling the Color

LaserWriter. Continue to use one or more of the readily available items listed above until the new

shims are available.

(0-15mm)

0° to +2°

Front

Rear

Figure 4- Side view of printer with leveling diagram

Page 2 of 2

3/15/96

Color LaserWriter 12/600PS- Leveling Instructions

1 2 ... 368 369 370 371 372 373 374 375 376

No comments

Apple Color LaserWriter 12/600 PS ation User Manual Page 373