Apple Color LaserWriter 12/600 PS ation User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 376
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
95.08.23.16.19
Color LaserWriter 12/600 PS Basics & Theory 1–13
Density Control Panel
The density control panel on the rear of the printer can be used to
generate a service test page and to set three distinct types of adjust-
ments. Some adjustment settings are persistent (i.e., they will remain in
effect after a printer restart), and some are nonpersistent (i.e., they will
default to factory setting after a printer restart).
Panel Layout
In addition to the test print button, the density control panel has four
toner-indicator lights along the top, an LED density gauge in the
middle, and four input buttons along the bottom of the panel.
TEST PRINT
button: Press this button to generate a service test page.
Important
: If the printer is in energy-saving mode, you must print to
the printer or restart the printer before you can run a service test page.
ENTER
button: Engages the currently selected value.
Note
: The next four items are labelled on the panel according to their
density adjustment functions. During other adjustments, ignore the
labels and the functions described below.
COLOR SELECT
button: Selects the color whose density you want to
adjust.
Density gauge: Indicates the currently selected density value for the
selected color, light density to the left, dark to the right.
Note
: During printer-ready state, you can tell if the density settings are
not at the factory default by looking at the center density gauge LED
above the word
DEFAULT
. If this LED is off, then the density settings
have been changed from the default.
5 Plus/minus (+/-) buttons: Advance the density gauge setting.
6 Toner Lights: An illuminated toner light indicates the color that is
being adjusted.
M C Y Bk
COLOR
SELECT
DEFAULT ENTER
TEST
PRINT
Density
Gauge
Toner
Lights
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 375 376

Comments to this Manuals

No comments