Apple LaserWriter Pro 630 Envelope Feeder Technical Information Page 254

  • Download
  • Add to my manuals
  • Print
  • Page
    / 300
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 253
Configuring ATPS for the first time on a NetWare 4 server
If you are setting up the printer for access by Mac OS–based computers on a
NetWare 4 network and this is the first time you are configuring ATPS, follow
these instructions.
You can configure ATPS from the server console, or by running RCONSOLE
(remote console) from a client computer.
1At the console prompt, type
load install
The Install utility starts and a list of installation options appears.
2Choose the Maintenance/Selective Install option and press Enter.
An additional list of options appears.
3Select Product Options from the list and press Enter.
A list of product options appears. If the NLM is installed and operating, a
NW-MAC option is available.
4Select the NW-MAC option and press Enter.
A list of configuration files appears.
5Select Configure Printer Services and press Enter.
A list of print service configuration options appears.
6Select Quick Configuration and press Enter.
A list of lookup parameter options appears.
7Select the Printer Model entry and press Enter.
A list of printer types appears.
8Select the LaserWriter Pro 630 option and press Enter.
9In the lookup parameter list, change the zone name to the zone in which the printer is
currently located.
10 Select the Perform Lookup option and press Enter.
11 In the list of installed printers, locate and select the newly installed printer from the list.
(It should be identified as “LaserWriter Pro 630.”)
254
Appendix B
Page view 253
1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 299 300

Comments to this Manuals

No comments