LED Cinema Display (24-inch) Symptom Charts — Input/Output Issues 34
2010-02-08
Launch System Preferences: 3.
Sound and select ‘sound
output’ options. Verify output
option is set to display’s
internal speakers.
Yes Go to step 6.
No
Set output to internal
speakers. Retest. If needed,
replace logic board.
L11
Disconnect USB uplink cable 4.
from logic board and system.
Inspect cable connectors and
cable under magnication for
pinched cables and damaged
or bent pins.
Yes
Replace all-in-one cable. L14
No Go to step 5.
Disconnect USB uplink cable 5.
from logic board. Inspect logic
board USB connector under
magnication for damaged or
bent pins.
Yes
Replace logic board.
Retest.
M15
No Go to step 6.
Launch System Preferences 6.
and select Sound Eects
options. Verify that sounds play
normally from left and right
speakers.
Yes Speakers and amplier circuit
are OK.
No Reseat left, right, and
subwoofer speaker
connections on logic board
while inspecting cables
for damage. Retest. If not
resolved, go to step 7.
Launch System Preferences 7.
and select Sound output
options. Verify sound quality
normal when balance control
set to ‘left only’ and ‘right only’
speakers.
Yes Speakers and amplier circuit
are OK.
No
Based on results of test,
replace left or right speaker
or replace subwoofer. Retest.
If not resolved, go to step 8.
L11
Launch System Preferences 8.
and select Sound output
options. Verify sound quality
normal when balance control
set to ‘left only’ and ‘right only’
speakers.
Yes Speakers and amplier circuit
are OK.
No
Replace logic board. L11
Comments to this Manuals