Apple PowerBook (2400c) User Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 159
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
Connecting an external monitor
To connect an external monitor to your PowerBook, follow these steps. Also
consult the documentation that came with the monitor.
1 Press the Power (
π
) key once to get the Shut Down dialog box.
2 Click Shut Down or Sleep.
If you connect a monitor with your computer turned on, the computer will
not recognize the monitor.
3 Place the monitor where you will be using it.
If you have the external floppy disk drive attached to your computer, keep the
floppy disk drive and the monitor at least 8 inches apart. Interference
between the monitor and your computers floppy disk drive can cause errors
on your floppy disks.
Arrange the monitor so the top of the screen is slightly below eye level while
you work. Position the monitor to minimize glare and reflections on the
screen from lights and windows.
4 Make sure the monitor’s power cord is attached to the monitor. Plug the other end into
an outlet or power strip.
If your monitors power cord is designed to plug into the power receptacle on
the back of a computer, rather than into an electrical outlet, you can obtain a
cord with the correct plug from your Apple-authorized dealer.
If you are using a power strip, make sure it is turned on.
8 inches minimum
Floppy drive
57
Using PC Cards and Additional Equipment
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 158 159

Comments to this Manuals

No comments