Apple Multiple Scan 720 Display User Manual download pdf (Page 7)

Setting Up 7

Connecting the Apple Multiple Scan Display

to your computer

Important Before you connect any cords or cables, make sure that your computer is

turned off and unplugged.

1 Connect the socket end of the monitor power cord to the power cord receptacle on the back

of the display.

2 Plug the other end of the monitor power cord into the power socket on your computer.

3 If you are connecting the monitor to a Mac OS–based computer, insert the monitor

connector into the monitor port (marked with ™) on the back of the computer and tighten

the thumbscrews.

4 If you are connecting the monitor to an IBM PC-compatible computer, connect the adapter

that you acquired from your dealer to the monitor connector on the monitor cable, and

tighten the thumbscrews. Then insert the monitor connector with the adapter into the

monitor port on your computer.

If you installed a graphics card in your computer, connect the monitor cable to the graphics

card’s port instead. For information about installing graphics cards, see the manual that came

with your computer or graphics card.

PC adapter

Connector on

monitor cable

Monitor port on

IBM PC-compatible

computer

Monitor port icon

Connector on

monitor cable

1 2 3 4 5 6 7 8 9 10 11 12 ... 44 45

No comments

Apple Multiple Scan 720 Display User Manual Page 7