Apple Multiple Scan 720 Display User Manual download pdf (Page 6)

Positioning your Apple Multiple Scan Display

Here are some key factors to consider when determining where to place your monitor:

m Be sure that the desk or table can support the Apple Multiple Scan Display’s weight—

37.5 pounds (17 kg).

m Make sure that the monitor power cord reaches your computer. The cord should be

unobstructed when you swivel and tilt the monitor, so allow at least 6 inches (15 cm) of

clearance in the back. If you don’t allow enough clearance, the monitor connector might

be damaged when the cable hits an obstruction.

Once your monitor is in place, position it so that it faces you. Then adjust the viewing angle

of the monitor by tilting it up or down and turning it left or right on its stand.

Position the monitor so that when you use it, no bright light is behind the monitor or

reflected on the screen. Your eyes should be about level with the top edge of the screen

and between 18 and 28 inches (45 to 70 cm) away. Take occasional breaks when using your

computer, to focus your eyes on a distant object.

For your greatest comfort, use the following illustration to help you in positioning

your monitor.

Thighs horizontal

Shoulders relaxed

Screen positioned to avoid

reflected glare

Forearms and hands

in a straight line

Forearms level

or tilted up slightly

Lower back supported

Feet flat on the floor

Top of the screen at or slightly

below eye level (You may need

to adjust the height of your

monitor by placing something

under it or by raising your

work surface.)

Clearance under work surface

45–70 cm (18–28 in.)

6 Chapter 1

1 2 3 4 5 6 7 8 9 10 11 ... 44 45

No comments

Apple Multiple Scan 720 Display User Manual Page 6