Apple 2009 MacBook Service Manual download pdf (Page 12)

Clean non-marring work surface

ESD wrist strap and mat

Multi-compartment screw tray (such as a plastic ice cube tray)

#0 Phillips screwdriver (magnetized)

#1 Phillips screwdriver (magnetized)

Torx T6 screwdriver (magnetized)

4 mm socket wrench

Black stick (nylon probe 922-5065) or other non-conductive nylon or plastic flat-blade tool

Razor knife

Needle-point metal probe

Needlenose pliers

Tweezers

Kapton tape (922-1731) (0.5-inch x 12-yard roll)

Thermal grease (922-7144)

Gasket kit (varies with model)

Alcohol pads

Fine-point felt-tip permanent marker

Putty knife tool (922-6761)

Apple Pro keyboard and mouse (for troubleshooting)

Next: Repair Issues

Take Apart Issues

MacBook Pro (15-inch Mid 2009) Issues

MacBook Pro (13-inch Mid 2009) Issues

Take Apart Issues

The following tips are taken from the MacBook Pro service manuals and other sources. If you have any

questions regarding any of these tips, consult the manual before proceeding with a repair.

Serial number and Ethernet ID are located in the battery bay

Never double up layers of Kapton tape. Clear off old tape before applying new tape. Doubling up

layers can lead to clearance issues when you reassemble the system.

When removing memory from a MacBook Pro, you must remove memory from the top slot before

removing memory from the bottom slot.

When removing top case, be careful not to break the keyboard flex cable when lifting the top case.

1 ... 11 12 13 ... 22

No comments

Apple 2009 MacBook Service Manual Page 12