36 - iMac G5, 20-inch Troubleshooting
Symptom Charts
6. Remove the back cover to access the diagnostic LEDs on the main logic board.
7. With the back cover removed, locate the diagnostic LEDs 1 through 4 above the large
white arrow on the logic board.
8. Plug the power cord into the iMac G5 and into a known good AC outlet. LED #1 should
come on if your computer has been starting up properly. If LED #1 is off, see iMac G5:
Troubleshooting: No Power for further troubleshooting information.
9. Turn the computer on by pressing the internal power button. Press the small, metal
button under the fan cover as shown.
Comments to this Manuals