Apple Xserve RAID User's guide User's Guide download pdf (Page 11)

Introducing Xserve RAID

Remove the protective foam and the two boxes on top of the system.

Fold back the plastic covering on the unit and fold down the carton at the front and back of

the system.

With one person at the front of the system and one at the back, carefully slide your hands

between the system and its plastic cover where there are openings in the supporting foam,

lift the system out of the carton, and put it on the table or other surface.

Remove the protective ﬁlm that covers the front of the system.

If there is a plastic bracket that covers the center part of the system’s back panel, remove it.

This bracket holds the components securely in place during shipping.

Remove the mounting hardware and power cords from the two separate boxes, as well as the

system’s documentation.

Write down the system serial number you see on the back panel. Also copy the Ethernet

Media Access Control (MAC) number from the label on each control module (at the top and

bottom in the center of the system). You will need these numbers when setting up and

working with the monitoring and admin software.

he unit is heavy. You must have two people

lift it out of the box. With one person at

each end, slide your hands underneath

the unit and over the plastic sheet in

which it is wrapped. Working

together, lift the unit carefully

using your knees,

not your back.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 91 92

No comments

Apple Xserve RAID User's guide User's Guide Page 11