Apple Mac G4 (Power Supply Replacement) User Manual

Browse online or download User Manual for Computers Apple Mac G4 (Power Supply Replacement). Apple Mac G4 (Power Supply Replacement) User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
073-0723 Rev. B
Power Mac G4
Power Supply
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Warning: During this procedure, keep small parts away from children.
Tools Required
The following tools are required for this procedure:
#2 Phillips screwdriver
small flat-blade screwdriver
T-10 Torx driver
Opening the Computer
Warning: Always shut down your computer before opening it to avoid damaging its
internal components or causing injury. After you shut down the computer, the
internal components can be very hot. Let the computer cool down before
continuing.
1. Place your computer on a clean, flat surface.
2. If you think your computer is in sleep, press the power button on the front of the
computer to wake it.
3. Shut down your computer and wait five minutes before continuing.
4. If you attached a security cable through the computer’s lockable cover latch, remove
the cable.
5. Unplug all other cables from the computer except the power cord.
Page view 0
1 2 3 4 5 6 ... 12 13

Summary of Contents

Page 1 - Power Supply

073-0723 Rev. B  Power Mac G4 Power Supply Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instr

Page 2

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 10 2. Reinstall the fan. Replacement Note: Align the fan with the three latches in the dr

Page 3

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 11 3. Reinstall the optical drive carrier. Replacement Note: Before sliding the carrier b

Page 4

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 12Replacement Note: Before sliding the rear panel back onto the carrier, make sure the to

Page 5

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 13 Closing the Computer 1. Raise the side access panel, lift the latch, and press the pane

Page 6

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 2 6. Touch the metal PCI access covers on the back of the computer. (Figure 1)Important:

Page 7

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 3 Removing the Installed Power Supply 1. Remove the two screws that secure the optical dri

Page 8

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 4 3. Slide the carrier back and rotate it so that you can reach the drive cables.4. Discon

Page 9

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 5 6. Using a small flat-blade screwdriver, gently lift up the locking tab on the lower fan

Page 10

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 6 8. Use a T-10 Torx driver to remove the power supply screw. (Figure 8)Figure 8 9. Remov

Page 11

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 7 10. Disconnect the power supply cables from all drives and from the logic board.11. Note

Page 12

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 8 13. Slide the power supply forward and remove the power supply and cable harness from th

Page 13 - Closing the Computer

Power Mac G4 (Mirrored Drive Doors/FW 800) Power Supply - 9 Installing the Replacement Power Supply 1. Install the replacement power supply. Replace

Comments to this Manuals

No comments