Apple POWERBOOK G4 User Manual download pdf (Page 6)

- PowerBook G4 AirPort Card

2. If removing an existing AirPort Card (if not, skip to step 3), pull back on

the antenna clip to release the antenna connector and allow the card to

rise up slightly, then pull the card from the AirPort connector.

Hold the AirPort Card with one hand and grasp the antenna cable

connector with the other. While being careful not to strain the antenna

cable, firmly pull the connector straight out of the AirPort Card.

Important:

If an AirPort Card is

not

being reinstalled right away, the

antenna cable connector must be replaced into its holder (shown in

step 4) and the loop of the antenna cable pulled up slightly and away

from the edge of the computer case. This prevents the cable from

interfering with the PC card slot, below, or getting pinched during

reassembly.

Also, if the insertion end of the AirPort Card connector is rotated up,

push it down into the level position. This allows the bottom case to

install properly.

3. If the AirPort Card to be installed came with the AirPort adapter,

remove the metal clip and pull the AirPort Card from the adapter. (The

adapter and metal clip are not used with your PowerBook.)

Antenna

Clip

Antenna Cable

Connector

Antenna Cable

AirPort Card

Connector

AirPort

Adapter

Metal Clip

AirPort

Card

1 2 3 4 5 6 7 8 9 10 11

No comments

Apple POWERBOOK G4 User Manual Page 6