Apple Xserve RAID User's guide User Manual download pdf (Page 8)

073-1151 Rev. A 8

Release the thumbscrew that secures the Xserve RAID Card to the enclosure. 4.

Note: The thumbscrew is captive; you cannot remove it.

Shift the Xserve RAID Card toward the enclosure side, in the direction of the arrow shown, 5.

until it clears the four mushroom-shaped stando"s that hold the card in place.

Rotate the Xserve RAID Card up slightly from the logic board side (as shown), and carefully 6.

pull the card up and toward the logic board to free it from the stando"s and four alignment

slots in the enclosure. Be careful not to let any Xserve RAID Card components come into

contact with the stando"s or the enclosure as you remove the card.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Apple Xserve RAID User's guide User Manual Page 8