Apple PC Compatibility Card 7-inch card User Manual download pdf (Page 143)

134

If your PC Compatibility Card is already installed, installing memory on the

card involves the following steps:

m opening the computer

m removing the card

m removing the existing DIMM, if one is installed

m installing the new DIMM

m replacing the card

m closing the computer

If the card is not installed, you need only remove the existing DIMM (if one

is installed), install the new DIMM, install the card, and close the computer.

Opening the computer

1 Turn off the computer.

Make sure the computer is plugged in but turned off.

2 Remove the lid from the computer.

For detailed instructions, see the earlier chapter in this manual on installing

the PC Compatibility Card in your computer model.

Removing the card

For detailed instructions, see the earlier chapter in this manual on installing

the PC Compatibility Card in your computer model.

1If you haven’t already done so, remove the loopback cable from the port on the back of

the PC Compatibility Card.

2 Touch the metal part of the power supply case inside the computer to discharge any

static electricity that might be on your clothes or body.

Always do this before you touch any parts or install any components inside

the computer.

Appendix A

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 212 213

No comments

Apple PC Compatibility Card 7-inch card User Manual Page 143