Apple Xserve Intel (Late 2006) DIY Procedure for Power D User Manual download pdf (Page 13)

Xserve (Late 2006) Power Distribution Board Replacement Instructions 13

Tighten the ve Phillips screws that fasten the airow duct to the fan array, in the order

shown, to prevent the duct from warping. Do not overtighten the screws.

Replacing the Power Distribution Board Cable

Connect the power distribution board cable to its connectors on the drive interconnect

backplane and the power distribution board.

Replacing the Power Supplies

Slide the rst power supply all the way into the bay, and then press the handle to seat it and

lock it in place.

Repeat for the second power supply, if installed.

Slide the power supply in and

press the handle to seat it.

Replacing the Apple Drive Modules

Slide the rst Apple drive module into its bay until it is rmly seated. Then press the handle

in ush with the front panel.

Repeat for all other installed drive modules.

1 ... 12 13 14

No comments

Apple Xserve Intel (Late 2006) DIY Procedure for Power D User Manual Page 13