Apple Xserve Intel (Late 2006) DIY Procedure for Logic B User Manual download pdf (Page 19)

Xserve (Late 2006) Logic Board Replacement Instructions 19

Rotate the top of the holder to the closed position.

Engage the latch on the processor holder.

Repeat steps 1–7 for the second processor.

Replacing the Processor Heat Sinks

Clean o any existing thermal grease on the left (CPU B) processor heat sink using an alcohol

wipe provided with the thermal grease.

Holding the heat sink in one hand, reconnect its 2-pin thermal sensor cable to the logic

board.

Note: Make sure the connector on the sensor cable is oriented as illustrated, with the gold

ngers facing up.

Carefully seat the heat sink over the processor, aligning the four screws with the holes in the

logic board.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

No comments

Apple Xserve Intel (Late 2006) DIY Procedure for Logic B User Manual Page 19