Apple Xserve (Early 2009) User Manual download pdf (Page 16)

16 Chapter 1 Installing the Xserve

Step 4: Align and secure the rails

To make sure the Xserve slides easily in and out of the rack, use the alignment guide to

position the rails in the rack before you tighten the mounting screws.

1 Insert the alignment guide in the front of the rails.

Insert the alignment

guide into the rails

and tighten all the screws.

2 Tighten the front mounting screws

Important: If you have a square-hole rack, make sure the raised alignment block on

the back of each mounting spacer is seated properly in the hole in the rack post as you

tighten the screws.

3 Tighten the rear mounting screws.

4 Remove the alignment guide.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Apple Xserve (Early 2009) User Manual Page 16