Apple Xserve (Early 2008) DIY Procedure for Xserve RAID User Manual

073-1151 Rev. B 1© 2007, 2008 Apple Inc. All rights reserved. Xserve (Late 2006/Early 2008)Xserve RAID Card BatteryReplacement InstructionsFollow

073-1151 Rev. B 10© 2007, 2008 Apple Inc. All rights reserved.Xserve RAID Card BatteryLift the Xserve RAID Card battery straight up o its three m

073-1151 Rev. B 11© 2007, 2008 Apple Inc. All rights reserved.Installing the Replacement Xserve RAID Card BatteryImportant: Do not drop, disassemb

073-1151 Rev. B 12© 2007, 2008 Apple Inc. All rights reserved.Replacing the Power Distribution Board Lower the replacement power distribution boar

073-1151 Rev. B 13© 2007, 2008 Apple Inc. All rights reserved.Replacing the Xserve RAID CardLower the Xserve RAID card into the enclosure at a sli

073-1151 Rev. B 14© 2007, 2008 Apple Inc. All rights reserved.Reconnect the backplane-to-logic board I/O cable and the Xserve RAID Card battery ca

073-1151 Rev. B 15© 2007, 2008 Apple Inc. All rights reserved.Tighten the ve Phillips screws that fasten the airow duct to the fan array, in the

073-1151 Rev. B 16© 2007, 2008 Apple Inc. All rights reserved.Closing the XserveReplace and secure the cover.1. Slide the Xserve back into the rac

073-1151 Rev. B 2© 2007, 2008 Apple Inc. All rights reserved.Unplug all cables from the Xserve. 3. Note: If you have trouble releasing a cable fro

073-1151 Rev. B 3© 2007, 2008 Apple Inc. All rights reserved.Removing the Installed Xserve RAID Card BatteryNote: Before removing the Xserve RAID

073-1151 Rev. B 4© 2007, 2008 Apple Inc. All rights reserved.Power Distribution Board CableLocate the power distribution board cable. 1. Disconnec

073-1151 Rev. B 5© 2007, 2008 Apple Inc. All rights reserved.Caution: The power distribution board cable connectors are tight and can be dicult t

073-1151 Rev. B 6© 2007, 2008 Apple Inc. All rights reserved.Fan ArrayLoosen the two thumbscrews that secure the fan array to the enclosure. 1. No

073-1151 Rev. B 7© 2007, 2008 Apple Inc. All rights reserved.Xserve RAID CardRelease the two locking levers on the front panel board cable connect

073-1151 Rev. B 8© 2007, 2008 Apple Inc. All rights reserved.Release the thumbscrew that secures the Xserve RAID Card to the enclosure. 4. Note: T

073-1151 Rev. B 9© 2007, 2008 Apple Inc. All rights reserved.Power Distribution BoardLocate the power distribution board. 1. Release the thumbscre