Apple PowerBook 520 Specifications Page 94

  • Download
  • Add to my manuals
  • Print
  • Page
    / 184
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 93
6 Shut down the computer you are connecting to, and turn off other devices in the SCSI
chain.
7 Connect the PowerBook to the other computer or, if there are already devices attached,
to the end of the SCSI chain.
Remove the terminator from the last device in an existing chain before
connecting the PowerBook.
8 Turn on the PowerBook by pressing the power button.
After a few seconds a SCSI icon appears on the screen, showing the ID
number you assigned in step 3.
9 Turn on the other SCSI devices in the chain, if any.
10 Turn on the other computer.
The PowerBook appears as a hard disk icon on the screen of the computer
you connected it to. You can now transfer and use files as if the PowerBook
were an external disk drive.
WARNING
If you do not see the SCSI icon, and the computer either
starts normally or displays an error message, choose Shut Down (if you
can) and then immediately disconnect your computer from the SCSI
chain. If you cant choose Shut Down, try pressing the power button.
If you cannot shut down your PowerBook, you should disconnect the
cable anyway, or you may lose information. Then go back and repeat
steps 6 through 8.
WARNING
Always shut down the PowerBook before connecting or
disconnecting the SCSI disk adapter cable. Connecting the adapter cable
while the computer is turned on can damage the computer.
94
Chapter 8
Page view 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 183 184

Comments to this Manuals

No comments