Apple Power Mac G4 / Macintosh Server G4 (Video Card Rep User Manual download pdf

073-0562 Rev. E

Power Mac G4 / Macintosh Server G4

Video Card

Replacement Instructions

Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions

could result in damage to your equipment and may void your warranty.

Note:

Written and video instructions covering customer-installable parts are available at

http://www.info.apple.com/installparts/.

Tools Required

• Phillips screwdriver

• Pliers

Opening the Computer

Warning: Always turn off your computer before opening it to avoid damaging its

internal components.

1. Place your computer on a clean, ﬂat surface.

2. If you think your computer is in sleep, press the power button on the front of the

computer to wake it.

3. Shut down your computer by opening the Special menu and choosing Shut Down.

Then wait ﬁve minutes for the computer’s internal components to cool down.

4. If you attached a security cable through the computer’s lockable cover latch, remove

the cable.

5. Unplug all other cables from the computer except the power cord.

6. Touch the metal PCI access covers on the back of the computer.

(Figure 1A)

Important:

To avoid electrostatic discharge, always ground yourself by touching the

port access covers before you touch any parts or install any components inside the

computer. To avoid static electricity building back up in your body, do not walk

around the room until you have completed your installation and closed the computer.

7. Unplug the power cord.

1 2 3 4 5 6

Summary of Contents

Page 1 - Video Card

073-0562 Rev. E Power Mac G4 / Macintosh Server G4 Video Card Replacement Instructions Be sure to follow the instructions in this sheet carefully

Page 2 - Removing the Installed Card

Power Mac G4 Video Card - 2 8. Lift the latch on the right side access panel. (Figure 1B) 9. Gently lower the access panel until it lies ﬂat. To av

Page 3 - Closing the Computer

Power Mac G4 Video Card - 3 • Pull the card gently to see if it is properly connected. If it resists and stays in place, and if its gold connectors

Page 4 - Power Mac G4 Video Card

Power Mac G4 Video Card - 4 12AB

Page 5

Power Mac G4 Video Card - 5 34AGP slotABC

Page 6

Power Mac G4 Video Card - 6 5CABB

Comments to this Manuals

No comments

Apple Power Mac G4 / Macintosh Server G4 (Video Card Rep User Manual

Browse online or download User Manual for Hardware Apple Power Mac G4 / Macintosh Server G4 (Video Card Rep. Apple Power Mac G4 / Macintosh Server G4 (Video Card Replacement) User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Apple Power Mac G4 / Macintosh Server G4 (Video Card Rep